@ 25oC, EXCEPT WHERE SPECIFIED

Property

Measurement

Standard

Tensile Strength

2,500 Psi +

ASTM D 638
Bond Strength 1,500 Psi + ASTM D 4541 (Elcometer ) SteelSSPC SP-10, AR / P-24 Primer

Impact

a) 1,650 In. - lbs (1.9 X 106 gm-cm )

b) No Failure

ASTM G-14 , Steel Pipe

ASTM 1709A

Compressibility 4,200 Psi ASTM G 695
Elongation, Ultimate (%)

Part Recoverable (%)

35% Min.

67% Min.

ASTM D 638

ASTM D 638 (Modified)

Surface Hardness 70 (+/-) 5     Shore D ASTM D 2240
Abrasion Resistance

a)       Weight Loss 0.0102 gms. Taber Abraser , H-10 Wheel, 1000 gms, 1000 cycles

b)       40 Microns loss in 2,800 hours in circulating 35% SiC and 5% Fe slurry.

FTMS 141 

Rensselaer Polytechnic Institute

Flexibility

No effect bending 0.5 mm plate coated with 1 mm (40 mil ) Purethane® over mandrel of 8 mm diameter.

ASTM D 1737
Water Vapor Permeability

0.262 gms. / 24 Hour / Sq. Metre 0.0038 perm-inches

ASTM E - 96
Oxygen Permeability

a)       Nil at 1 Kg/cm2 feed pressure.

b)       2.09 X 10-8 [(cc cm)/(cm2 sec cm Hg)] at 10 Kgs / cm2   feed pressure

Gas Chromatograph, Indian Institute of Chemical Technology (IICT)
Accelerated Weathering Slight color change and surface chalking. No other effect. 2,000 Hour Weatherometer
Salt Spray

No effect -   6,000 Hour

No effect - 10,000 Hour

Rensselaer Polytechnic Institute

IICT ( Both ASTM B 117-73).

Water Absorption, 30 Days < 0.5 % ASTM D- 570
Cathodic Disbondment Radius of disbondment  - 6 mm    ASTM G 8 , -1.5 V, 3% NaCl, 30 days, Initial hole 6 mm.
No effect after 6 weeks in seawater at 1200 mV. No effect after 11 weeks in seawater at 900 mV Netherlands Paint
Research Council TNO
No effect after 24 days with    2700 micron (106 mil) thick  ZEBRON under 1022 mV in seawater at 25 deg. C Netherlands Paint
Research Council TNO
No disbondment after 5 days with 150 mil ZEBRON 5VDC in 5 percent NaCl in glycerol at 300 deg. F. Minor disbondment at side of holiday after 22 days. Netherlands Paint
Research Council TNO
Volume Resistivity > 1014  Ohm-cm ASTM D 257
Temperature Resistance Continuous Dry 93oC (200oF)Max. Wet Immersion 65oC (150oF) Max.
Intermittent Dry 120oC (250oF) Max. Low Temp. (-)129oC Max.
Thermal Conductivity 0.000723 cal./sec.cm2deg.C Per cm at 20oC ASTM C-177

Tests by leading international agencies - Taylor Woodrow Research Laboratory, U.K, Rensselaer Polytechnic Institute, USA, Northwest Testing Laboratories , USA, City of Los Angeles Bureau of Engineering, Bureau of Reclamation, US EPA, United States Testing Company, USA, Netherlands Paint Research Council TNO ,  Indian Institute of Chemical Technology (IICT).