Water Pipeline

Water Pipeline

AWWA C222

Water Pipe AWWA C222

Water Pipeline (AWWA C 222)

Amchem manufactures Purethane NXT/9000, 100% Solids Polyurethane Coating for External Coating and Internal Lining large diameter water pipelines.

Amchem will also provide turnkey solutions with spray equipment and crews for joint execution of your Polyurethane coating/ lining projects. You can bid and start this work with confidence knowing that there is no expensive learning curve when you associate with us !!

Key features are :

External Coating

  • Seamless, monolithic coating. No overlaps or mutliple layers
  • High performance, greatly exceeds AWWA C222-18
  • Cathodic Disbondment typically 1-2 mm (ASTM G95, -1.5V, 30 Days @ 23C)
  • Applied directly to the blast cleaned surface
  • Fast cure - Snap set version with >10 Seconds Gel time can be used for coating pipes on inline skew conveyors
  • High productivity - 4,000 to 6,000 sq.m per day of coating possible with single facility
  • Low investment - Only spray system need to be added to existing lines for 3LPE/ FBE for quick conversion
  • Portability - Small, easy to move application set up. Can be shifted to temporary facilities with locational advantage
  • Cost effective - Much cheaper than 3LPE and Dual FBE

Internal Lining

  • Fast cure even in winter - unlike Epoxy
  • Even thickness over weld seams and main pipe
  • Very low water absorption and WV permeability
  • Flexible, impact resistant
  • Extremely low Total Organic Carbon (TOC) of < 10 Parts Per Billion. Epoxy will test typically at 2-5 parts per Million
  • Certified to WRAS / BS 6920, Singapore SS 375 etc for Drinking Water.

We will be happy to provide turnkey installation on your upcoming projects!

Contact:
Shomendra Mann
Amchem Products Pvt. Ltd
A-79. Sector 58,
NOIDA 201 301, India
Tel : 0120 - 2580121 / 4325540
Fax: 0120 - 2581351
E-Mail : info@amchemproducts.com
Website : www.amchemproducts.com